remote-addresses
Properties
Table 56
remote-addresses properties
Name
connected-ports
remote-address
Example
# show replication-volumes
...
<OBJECT basetype="remote-addresses" name="remote-address" oid="2" format="rows">
<PROPERTY name="connected-ports" type="string"></PROPERTY>
<PROPERTY name="remote-address" type="string">IP=10.30.40.21:3260</PROPERTY>
</OBJECT>
...
Type
Description
•
port-IDs: For a remote primary or secondary volume, the IDs of up to two
string
hosts ports in the local system that are connected to the remote system. If two
ports are connected but only one is shown, this indicates that a problem is
preventing half the available bandwidth from being used.
•
N/A: For a local primary or secondary volume.
The address of each host port in the remote system through which the volume is
string
accessible.
HP P2000 G3 MSA System CLI Reference Guide 443