Example Show the condition of SAS port connections in a two-enclosure system:
# show sas-link-health
Encl
Ctlr
Health Reason Health Recommendation
-----------------------------------------------------------------------------
1
A
1
B
-----------------------------------------------------------------------------
Encl
Ctlr
Health Reason
Health Recommendation
-----------------------------------------------------------------------------
2
A
No drive enclosure is connected to this expansion port. This is normal if
this is the last (or only) enclosure in the cabling sequence of the system.
- No action is required.
2
A
2
B
No drive enclosure is connected to this expansion port. This is normal if
this is the last (or only) enclosure in the cabling sequence of the system.
- No action is required.
2
B
-----------------------------------------------------------------------------
Success: Command completed successfully. (2012-01-19 10:10:13)
Basetypes
• expander-ports
• status
Name
Out Port
Out Port
Name
Out Port
In Port
Out Port
In Port
Status
Up
Up
Status
Disconnected
Up
Disconnected
Up
HP P2000 G3 MSA System CLI Reference Guide 277
Health
OK
OK
Health
N/A
OK
N/A
OK