HP P2000 G3 Cli Reference Manual page 311

Total Bps
If the perf parameter is specified, this field shows the data transfer rate, in bytes per second, since
the last sampling time.
Health
•
OK
•
Degraded
•
Fault
•
Unknown
Health Reason
If Health is not OK, this field shows the reason for the health state.
Health Recommendation
If Health is not OK, this field shows recommended actions to take to resolve the health issue.
Example Show information for all vdisks:
# show vdisks
Name Size
Job% Serial Number
Health Reason
-----------------------------------------------------------------------------
VD1 587.1GB
41% SN
VD2 146.5GB
SN
VD3 900.1GB
2% SN
-------------------------------------------------------------------------
Success: Command completed successfully. (2012-01-19 15:31:35)
Show information for all vdisks, with performance statistics fields:
# show vdisks perf
Name Size
Job% Serial Number
Data Transferred
-----------------------------------------------------------------------------
vd01 587.4GB
SN
25.6MB
...
-----------------------------------------------------------------------------
Success: Command completed successfully. (2012-01-19 15:31:50)
Basetypes • virtual-disks
• status
See also • create vdisk
• delete vdisks
• expand vdisk
• set vdisk
Free Own Pref
Drive Spin Down
Health Recommendation
116.7GB B B
Disabled
95.7GB A A
Enabled - all spinning
900.1GB B B
Disabled
Free Own Pref
Drive Spin Down
Total Bps Health
587.4GB A A
Disabled
28.1KB OK
RAID Disks Spr
Spin Down Delay
RAID50 6 0
0
RAID0 2 0
15
RAID1 2 0
0
RAID Disks Spr
Spin Down Delay
Health Reason Health Recommendation
RAID5 5 0
0
HP P2000 G3 MSA System CLI Reference Guide 311
Chk Status Jobs
Health
64k FTOL VRSC
OK
64k UP
OK
N/A OFFL INIT
OK
Chk Status Jobs
64k FTOL