HP P2000 G3 Cli Reference Manual page 314

Data Transferred
Total amount of data read and written since the last sampling time.
Data Read
Shown by the all parameter. Amount of data read since the last sampling time.
Data Written
Shown by the all parameter. Amount of data written since the last sampling time.
Total Bps
Data transfer rate, in bytes per second, since the last sampling time. This is the sum of Read Bps
and Write Bps.
Read Bps
Shown by the all parameter. Data transfer rate, in bytes per second, for read operations since the
last sampling time.
Write Bps
Shown by the all parameter. Data transfer rate, in bytes per second, for write operations since the
last sampling time.
Sample Time
Date and time, in the format year-month-day hour:minutes:seconds, when the data
sample was taken.
Example Show live statistics for vdisks VD1 and MyVdisk:
# show vdisk-statistics VD1,MyVdisk
Name
Number of Writes
Write Resp Time
-----------------------------------------------------------------------------
VD1
10507038
240665
MyVdisk
9913102
109815
-----------------------------------------------------------------------------
Success: Command completed successfully. (2012-01-19 16:25:26)
Show historical statistics from a specified date and time range for vdisk VD2:
# show vdisk-statistics VD2 historical time-range "start 2012-01-18 4:40 PM
end 2011-01-18 5:00 PM"
Name Serial Number
-------------------------------------------
VD2 SN
Data Transferred
--------------------------------------------------------------------------
30.5GB
31.5GB
-------------------------------------------
Success: Command completed successfully. (2012-01-19 12:32:51)
314 Alphabetical list of commands
Serial Number Bytes per second
Data Read
Reset Time
SN 22.0MB
478.8GB
2011-01-17 08:15:01
SN 22.1MB
539.3GB
2012-01-17 21:01:20
Total Bps
33.9MB
35.0MB
IOPS Number of Reads
Data Written I/O Resp Time
82 6179839
1024.4GB 156240
78 4872260
1044.1GB 79033
Sample Time
2012-01-18 17:00:00
2012-01-18 16:45:00
Read Resp Time
12699
16405