104-Asr Timer Failure; 162-System Options Not Set; 172-1-Configuration Non-Volatile Memory Invalid - HP ProLiant Troubleshooting Manual

102-System Board Failure, Timer Test Failed
Audible Beeps: None
Possible Cause: 8237 DMA controllers, 8254 timers, and similar devices.
CAUTION:
board. If you believe the system board requires replacement, contact HP Technical Support
("Contacting
Action: Contact an authorized service provider for a system board replacement.

104-ASR Timer Failure

Audible Beeps: None
Possible Cause: System board failure.
CAUTION:
board. If you believe the system board requires replacement, contact HP Technical Support
("Contacting
Action: Run Insight Diagnostics
indicated.

162-System Options Not Set

Audible Beeps: 2 long
Possible Cause: Configuration is incorrect. The system configuration has changed since the last boot
(addition of a hard drive, for example) or a loss of power to the real-time clock has occurred. The real-
time clock loses power if the onboard battery is not functioning correctly.
Action: Press the F1 key to record the new configuration. Run the server setup utility to change the
configuration. If this message persists, you may need to replace the onboard battery.
163-Time & Date Not Set
Audible Beeps: 2 long
Possible Cause: Invalid time or date in configuration memory.
Action: Run the server setup utility and correct the time or date.

172-1-Configuration Non-volatile Memory Invalid

Audible Beeps: None
Possible Cause: Nonvolatile configuration corrupted.
Action: Run the server setup utility and correct the configuration.
Only authorized technicians trained by HP should attempt to remove the system
HP" on page 173) before proceeding.
Only authorized technicians trained by HP should attempt to remove the system
HP" on page 173) before proceeding.
("HP Insight Diagnostics" on page 75) and replace failed components as