show fans
Description Shows information about each fan in the storage system.
Syntax
show fans
Output Name
Fan name in the form Fan loc:position-PSU power-supply-ID for a controller enclosure or
P2000 drive enclosure; Fan fan-unit-ID for a D2700 or MSA70 enclosure. The position is as
viewed from the back of the enclosure.
Location
Fan location in the form Enclosure enclosure-ID - position. The position is as viewed
from the back of the enclosure.
Status
•
Up
•
Warning
•
Error
•
Not Present
•
Unknown
Speed
Fan speed (RPM).
Position
Fan position, as viewed from the back of the enclosure:
•
Left.
•
Right.
•
Top.
•
Bottom.
Serial Number
•
(blank): Not applicable.
•
Serial number of a fan in a D2700 enclosure.
Firmware Version
•
(blank): Not applicable.
•
Firmware revision of a fan in a D2700 enclosure.
Hardware Version
•
(blank): Not applicable.
•
Hardware revision of a fan in a D2700 enclosure.
Health
•
OK
•
Degraded
•
Fault
•
Unknown
Health Reason
If Health is not OK, this field shows the reason for the health state.
Health Recommendation
If Health is not OK, this field shows recommended actions to take to resolve the health issue.
234 Alphabetical list of commands