HP P2000 G3 Cli Reference Manual page 275

Remote link information:
Connected Ports
• For a remote primary or secondary volume, this field shows the IDs of up to two hosts ports in the
local system that are connected to the remote system. If two ports are connected but only one is
shown, this indicates that a problem is preventing half the available bandwidth from being used.
• For a local primary or secondary volume, this field shows N/A.
Remote Address
The address of each host port in the remote system through which the volume is accessible.
Example Show information about all replication volumes:
# show replication-volumes
Name
Primary-Volume
MaxRetryTime
Priority
-----------------------------------------------------------------------------
vd01_v001
vd01_v001
1800
Medium
Connected Ports
--------------------------------------------------------------
A1
A1
rvd01_v001
vd01_v001
1800
Medium
Connected Ports
--------------------------------------------------------------
N/A
N/A
N/A
N/A
Success: Command completed successfully. (2012-01-18 15:16:46)
Basetypes • replication-volume
• status
See also • set replication-volume-parameters
• show replication-sets
Serial Number Status
Primary-Volume-Serial
On Error Link Type
Connection Status Connection Time
SN Online
SN
Retry iSCSI
Online
Remote Address
IP=10.134.9.46:3260
IP=10.134.9.47:3260
IP=10.134.9.48:3260
IP=10.134.9.49:3260
SN Online
SN
Retry iSCSI
Not Attempted
Remote Address
IP=10.134.9.40:3260
IP=10.134.9.41:3260
IP=10.134.9.42:3260
IP=10.134.9.43:3260
Status-Reason Monitor
Primary-Volume-Status
On Collision Monitor Interval
N/A OK
Online
Oldest 300
2018-01-18 10:04:00
N/A OK
Online
Oldest 300
N/A
HP P2000 G3 MSA System CLI Reference Guide 275
Location
MaxQueue
Remote
32
Local
32