enclosure-components
Properties
Table 28
enclosure-components properties
Name
type
enclosure-unit-
number
status
fru-partnnumber
fru_serialnumber string
additional-data
Example
# show enclosure-status
...
<OBJECT basetype="enclosure-components" name="enclosure-component" oid="6"
format="rows">
<PROPERTY name="type" type="string">Temp</PROPERTY>
<PROPERTY name="enclosure-unit-number" type="string">01</PROPERTY>
<PROPERTY name="status" type="string">OK</PROPERTY>
<PROPERTY name="fru-partnnumber" type="string">PN</PROPERTY>
<PROPERTY name="fru_serialnumber" type="string">SN</PROPERTY>
<PROPERTY name="additional-data" type="string">temp=37 C</PROPERTY>
</OBJECT>
...
Type
Description
Component type.
string
•
FAN: Cooling fan unit
•
PSU: Power supply unit
•
Temp: Temperature sensor
•
Voltage: Voltage sensor
•
Disk: Disk drive module
Component ID.
string
Component status.
string
•
Absent: The component is not present.
•
Error: The component or at least one subcomponent has failed.
•
Warning: The component or at least one subcomponent is not working
normally.
•
OK: The component and any subcomponents are working normally.
Temperature status OK indicates that the sensor is working properly, not that
the temperature is within an acceptable range.
•
N/A: Status is not available.
Part number of the field-replaceable unit (FRU) that contains the component.
string
Serial number of the FRU that contains the component.
Additional data, if applicable.
string
•
addr=: For a disk, the slot address.
temp=: For a temperature sensor, the temperature.
•
•
voltage=: For a voltage sensor, the voltage.
•
--: No data.
HP P2000 G3 MSA System CLI Reference Guide 395