Abort Volumecopy - HP P2000 G3 Cli Reference Manual

abort volumecopy

Description Aborts copying a volume. When the abort is complete, the destination volume is deleted.
Syntax
abort volumecopy volume
Parameters volume
Name or serial number of the source volume, the destination volume, or if a snapshot is being
copied, its associated master volume. For volume syntax, see Command syntax on page 22.
Example Abort creating destination volume vd1_copy:
# abort volumecopy v1_copy
Success: Command completed successfully. (vd1_copy) - The volume copy was
aborted. (2012-01-21 12:04:20)
See also • show volumecopy-status
• show volumes
• volumecopy
HP P2000 G3 MSA System CLI Reference Guide 35