Reset Vdisk-Statistics - HP P2000 G3 Cli Reference Manual

reset vdisk-statistics

Description Resets performance statistics for all or specified vdisks.
Syntax
reset vdisk-statistics [vdisks]
Parameters vdisks
Optional. Names or serial numbers of the vdisks to reset statistics for. For vdisk syntax, see
Command syntax
Example Reset statistics for vdisks VD1 and MyVdisk:
# reset vdisk-statistics VD1,MyVdisk
Success: Command completed successfully. (2012-01-21 11:37:44)
See also • reset all-statistics
• reset controller-statistics
• reset disk-error-statistics
• reset disk-statistics
• reset host-port-statistics
• reset volume-statistics
• show vdisk-statistics
• show vdisks
124 Alphabetical list of commands
on page 22. If this parameter is omitted, statistics are reset for all vdisks.