System-Parameters-Table Properties - HP P2000 G3 Cli Reference Manual

Table 80 system-parameters-table properties (continued)
Name
max-snapshot-
groups-per-pool
max-snapshots-
per-snapshot-
group
max-midline-
per-storage-
pool
max-standard-
per-storage-
pool
max-
performance-
per-storage-
pool
local-
controller
local-
controller-
numeric
serial-number
external-
targetid-
control
external-
targetid-
control-numeric
lan-heartbeat
lan-heartbeat-
numeric
ip-address-mode
ip-address-
mode-numeric
debug-flags
enclosure-flags
num-global-
spares
dynamic-spare-
rescan-rate
performance-
tuning-flags
482 XML API basetype properties
Type Description
Not applicable.
uint32
Not applicable.
uint32
Not applicable.
uint32
Not applicable.
uint32
Not applicable.
uint32
Controller you are currently logged in to.
string
• A: Controller A.
• B: Controller B.
Numeric equivalents for local-controller values.
string
•
0: B
•
1: A
Last five digits of the midplane serial number.
string
Not used.
string
Not used.
string
Not used.
string
Not used.
string
• CAPI_TWO_IP_ADDRESSES_MODE: Dual controller system has a unique
string
IP address for each controller.
• CAPI_ONE_IP_ADDRESS_MODE: Dual controller system has the same IP
address for both controllers, only one active at a time.
Numeric equivalents for lan-heartbeat values.
string
•
0: CAPI_TWO_IP_ADDRESSES_MODE
•
1: CAPI_ONE_IP_ADDRESS_MODE
For use by service personnel.
uint32
For internal use only.
uint32
Number of global-spare disks defined in the storage system.
uint32
Interval at which the system is scanned for disks automatically designated as
uint32
spares, if the dynamic spares feature is enabled.
For internal use only.
string