HP P2000 G3 Cli Reference Manual page 310

Status
• CRIT: Critical. The vdisk is online but isn't fault tolerant because some of its disks are down.
• FTDN: Fault tolerant with a down disk. The vdisk is online and fault tolerant, but some of its disks
are down.
• FTOL: Fault tolerant and online.
• OFFL: Offline. Either the vdisk is using offline initialization, or its disks are down and data may
be lost.
• QTCR: Quarantined critical. The vdisk is critical with at least one inaccessible disk. For example,
two disks are inaccessible in a RAID-6 vdisk or one disk is inaccessible for other fault-tolerant
RAID levels. If the inaccessible disks come online or if after 60 seconds from being quarantined
the vdisk is QTCR or QTDN, the vdisk is automatically dequarantined.
• QTDN: Quarantined with a down disk. The RAID-6 vdisk has one inaccessible disk. The vdisk is
fault tolerant but degraded. If the inaccessible disks come online or if after 60 seconds from
being quarantined the vdisk is QTCR or QTDN, the vdisk is automatically dequarantined.
• QTOF: Quarantined offline. The vdisk is offline with multiple inaccessible disks causing user data
to be incomplete, or is an NRAID or RAID-0 vdisk.
• STOP: The vdisk is stopped.
• UNKN: Unknown.
• UP: Up. The vdisk is online and does not have fault-tolerant attributes.
Jobs
Shows whether a job is running and its percent complete.
• DRSC: The disk is being scrubbed.
• EXPD: The vdisk is being expanded.
• INIT: The vdisk is initializing.
• RCON: The vdisk is being reconstructed.
• VRFY: The vdisk is being verified.
• VRSC: The vdisk is being scrubbed.
• Blank if no job is running.
Job%
• 0%-99%: Percent complete of running job.
• Blank if no job is running (job has completed).
Serial Number
Vdisk serial number.
Drive Spin Down
• Disabled: DSD is disabled for the vdisk. This is the default.
• Enabled - all spinning: DSD is enabled for the vdisk.
• Partial spin-down: DSD is enabled for the vdisk and its disks are partially spun down to
conserve power.
• Full spin-down: DSD is enabled for the vdisk and its disks are fully spun down to conserve
power.
Spin Down Delay
The period of inactivity after which the vdisk's disks and dedicated spares automatically spin down,
from 1–360 minutes.
Data Transferred
If the perf parameter is specified, this field shows the total amount of data read and written since
the last sampling time.
310 Alphabetical list of commands