HP P2000 G3 Cli Reference Manual page 377

Table 21 debug-log-parameters properties (continued)
Name Type
res2 string
res2-numeric string
capi2 string
capi2-numeric string
dms string
dms-numeric string
fruid string
fruid-numeric string
resmgr string
resmgr-numeric string
init string
init-numeric string
ps string
ps-numeric string
hb string
hb-numeric string
Description
Shows whether internal debug messages are enabled for inclusion in the
Storage Controller debug log.
• Off: Disabled. This is the default.
• On: Enabled.
Numeric equivalents for res2 values.
•
0: Off
•
1: On
Shows whether Internal Configuration API tracing messages are enabled for
inclusion in the Storage Controller debug log.
• Off: Disabled. This is the default.
• On: Enabled.
Numeric equivalents for capi2 values.
•
0: Off
•
1: On
Shows whether Snapshot feature debug messages are enabled for inclusion in
the Storage Controller debug log.
• Off: Disabled.
• On: Enabled. This is the default.
Numeric equivalents for dms values.
•
0: Off
•
1: On
Shows whether FRU ID debug messages are enabled for inclusion in the Storage
Controller debug log.
• Off: Disabled.
• On: Enabled. This is the default.
Numeric equivalents for fruid values.
•
0: Off
•
1: On
Shows whether Reservation Manager debug messages are enabled for inclusion
in the Storage Controller debug log.
• Off: Disabled. This is the default.
• On: Enabled.
Numeric equivalents for resmgr values.
•
0: Off
•
1: On
Not used.
Not used.
Not used.
Not used.
Not used.
Not used.
HP P2000 G3 MSA System CLI Reference Guide 377