suspend replication
Description Suspends the current replication operation on the specified secondary volume. This command must
be issued on the system that owns the secondary volume. Once suspended, the replication must be
resumed or aborted to allow the volume to resume normal operation.
Syntax
suspend replication
[set replication-set]
replication-volume
Parameters set replication-set
Optional. Name or serial number of the replication set.
replication-volume
Name or serial number of the secondary volume. If the name is not unique across replication sets,
specify the set parameter.
Example Suspend replication of primary volume V1 to secondary volume rV1:
# suspend replication rV1
Success: Command completed successfully. (2012-01-20 14:47:35)
See also
• abort replication
• resume replication
• show replication-sets
• show replication-volumes
330 Alphabetical list of commands