Show Vdisks - HP P2000 G3 Cli Reference Manual

show vdisks

Description Shows information for all or specified vdisks.
Syntax
show vdisks
[vdisks]
[perf]
Parameters vdisks
Optional. Names or serial numbers of the vdisks to show information about. For vdisk syntax, see
Command syntax
perf
Optional. Shows performance statistics from the latest historical sample for each vdisk (aggregated
from its member disks). Statistics shown include total amount of data transferred and average bytes
per second.
Output Name
Vdisk name.
Size
Vdisk size.
Free
Vdisk free space.
Own
Either the preferred owner during normal operation or the partner controller when the preferred
owner is offline.
Pref
Controller that owns the vdisk and its volumes during normal operation.
RAID
Vdisk RAID level.
Disks
Number of disks in the vdisk.
Spr
Number of spares assigned to the vdisk.
Chk
• For RAID levels except NRAID, RAID 1, and RAID 50, the configured chunk size for the vdisk.
• For NRAID and RAID 1, chunk-size has no meaning and is therefore shown as not applicable
(N/A).
• For RAID 50, the vdisk chunk size calculated as: configured-chunk-size x (subvdisk-members - 1).
For a vdisk configured to use 32-KB chunk size and 4-disk subvdisks, the value would be 96k
(32KB x 3).
on page 22.
HP P2000 G3 MSA System CLI Reference Guide 309