8 Installing the HP NetServer in an HP
Rack System/E or Rack System/U
Introduction
This chapter describes how to mount the HP NetServer in an HP Rack System/E
or Rack System/U rack. If you have an older HP System rack, see Chapter 13,
"Alternative Rack Mounting," for instructions. (If you are mounting the HP
NetServer in a non-HP rack, refer to the separate rack-mounting guide for
third-party racks. It is packed in the accessories tray in the HP NetServer's
shipping box.)
HP NetServer and Rack Components
The HP NetServer LH 6000r requires eight EIA units of space.
Bar
Nuts
Slide
Leveler
Foot
Rack
Template
All manuals and user guides at all-guides.com
Inside Face
Anti-Tip
Foot
Figure 8-1. Installation Hardware
Outside
Face
Handles
Bezel
NetServer
Latch
Slide
Bezel
Member
Hinge
Bezel
79