Set Remote-System - HP P2000 G3 Cli Reference Manual

set remote-system

Description Changes remote-system credentials stored on the local system. Do this when the user name or
password to access a remote system has been changed on that system
Syntax
set remote-system
[password password]
[username username]
system
Parameters password password
Optional. New password to access the remote system. The value is displayed in clear text.
username username
Optional. New user name to access the remote system.
system
Name or network-port IP address of the remote system.
Example Change the password that is stored to access a remote system:
# set remote-system password Abc_123 System2
Info: The password was set. (System2) (2012-01-21 14:45:22)
Success: Command completed successfully. (System2) - The remote system was set.
(2012-01-21 14:45:22)
See also • create remote-system
• delete remote-system
• remote
• show remote-systems
170 Alphabetical list of commands