Show Disk-Parameters - HP P2000 G3 Cli Reference Manual

show disk-parameters

Description Shows disk settings.
Syntax
show disk-parameters
Output SMART
Shows whether SMART (Self-Monitoring Analysis and Reporting Technology) is enabled or disabled
for disks.
• Detect-Only: Each disk in the system retains its individual SMART setting, as will new disks
added to the system.
• Enabled: SMART is enabled for all disks in the system and will be enabled for new disks added
to the system. This is the default.
• Disabled: SMART is disabled for all disks in the system and will be disabled for new disks
added to the system.
Drive Write Back Cache
• Disabled: Disk write-back cache is disabled for all disks in the system and will be disabled for
new disks added to the system. This parameter cannot be changed.
Timeout Retry Maximum
Maximum number of times a timed-out I/O operation can be retried before the operation is failed.
Attempt Timeout
Number of seconds before an I/O operation is aborted and possibly retried.
Overall Timeout
Total time in seconds before an I/O operation is failed regardless of the Attempt Timeout and
Number of Retries settings.
Drive Spin Down Non-Vdisk Enable
Shows whether available disks and global spares will spin down after a period of inactivity shown
by the Drive Spin Down Non-Vdisk Delay field.
• Disabled: Drive spin down for available disks and global spares is disabled. This is the default.
• Enabled: Drive spin down for available disks and global spares is enabled.
Drive Spin Down Non-Vdisk Delay
Shows the period of inactivity in minutes after which available disks and global spares will spin
down, from 1–360 minutes. The default is 15 minutes. The value 0 means spin down is disabled.
Example Show disk settings:
# show disk-parameters
Disk Parameters
-------------
SMART: Enabled
Drive Write Back Cache: Disabled
Timeout Retry Maximum: 3
Attempt Timeout: 8
Overall Timeout: 105
Drive Spin Down Non-Vdisk Enable: Disabled
Drive Spin Down Non-Vdisk Delay: 0
Success: Command completed successfully. (2012-01-18 15:00:13)
Basetypes • drive-parameters
• status
See also • set disk-parameters
212 Alphabetical list of commands