Enclosure-Fru - HP P2000 G3 Cli Reference Manual

enclosure-fru

Properties
Table 29 enclosure-fru properties
Name
name
description
part-number
serial-number
revision
dash-level
fru-shortname
mfg-date
mfg-date-
numeric
mfg-location
mfg-vendor-id
fru-location
configuration-
serialnumber
fru-status
original-
serialnumber
original-
partnumber
original-
revision
396 XML API basetype properties
Type Description
FRU name.
string
• CHASSIS_MIDPLANE: 2U chassis and midplane circuit board
• RAID_IOM: Controller module
• IOM: Expansion module
• POWER_SUPPLY: Power supply module
FRU long description.
string
FRU part number.
string
FRU serial number.
string
FRU hardware revision level.
string
FRU template revision number.
string
FRU short description.
string
Date and time, in the format year-month-day hour:minutes:seconds
string
(UTC), when a PCBA was programmed or a power supply module was
manufactured.
Unformatted mfg-date value.
string
City, state/province, and country where the FRU was manufactured.
string
JEDEC ID of the FRU manufacturer.
string
Location of the FRU in the enclosure.
string
• MID-PLANE SLOT: Chassis midplane.
• UPPER IOM SLOT: Controller module or expansion module A.
• LOWER IOM SLOT: Controller module or expansion module B.
• LEFT PSU SLOT: Power supply module on the left, as viewed from the
back.
• RIGHT PSU SLOT: Power supply module on the right, as viewed from the
back.
Configuration serial number.
string
FRU status.
string
• Absent: Component is not present.
• Fault: At least one subcomponent has a fault.
• OK: All subcomponents are operating normally.
• Not Available: Status is not available.
For a power supply module, the original manufacturer serial number; otherwise,
string
N/A.
For a power supply module, the original manufacturer part number; otherwise,
string
N/A.
For a power supply module, the original manufacturer hardware revision;
string
otherwise, N/A.