Table of Contents
Advertisement
Financial Report
The Financial Report selection allows you to reprogram the descriptors that appear with the Financial
Report totals and counters. For example: the first total on the financial report "+PLU TTL" represents
the total of all positive PLU entries. You might want to re-label this total to say "SALES TTL". You
can reprogram any of the Financial Report totals listed here with any 24-character descriptor.
Sam4s ER-260EJ/256EJ OP Manual v1.20
1. From the MESSAGES screen, select FINANCIAL RPT or press 4. Press CASH to
display the POSTAMBLE screen.
FINANCIAL RPT
1.+PLU TTL
2. There are 80 descriptors, corresponding to the order information appears on the
Financial Report (go to "Financial" on page 171 to see a sample report.)
3. Use the CHARGE1 and the CHARGE2 keys to select the report line you wish to
program and press the CASH key.
4. Type the new descriptor (up to 24 characters) using the overlay (or enter codes if
code method selected in system options). Press CASH to confirm the new line.
5. Continue to program additional lines or press CLEAR to return to the PROGRAM
MODE screen.
Program Mode Programming • 165
Advertisement
Table of Contents
