Program 100 - Plu Status Programming - Sam4s ER-180U Operator's And Programming Manual

Program 100 - PLU Status Programming

ER-180U
1. Move to the PGM-Mode.
2. To begin the program, enter 1 0 0, press the SBTL key.
1 0 0
3. Select the PLU or PLUs you wish to program in one of the following ways:
•
Enter up to 500 of the PLU and press the PLU key, or
Enter the PLU#,
up to 500
•
Enter the number of the first PLU in a range of PLUs that are to receive the
same setting; press the PLU key. Enter the last number in the range;
press the PLU key.
Enter the PLU#,
up to 500
4. Refer to the "PLU" Status Chart" to determine the values for N1 through N8.
Enter the values you have selected, press the X/TIME key. (You do not
need to enter preceding zeros. )
N1 N2 N3
5. To program additional PLUs, repeat from step 3, or press the CASH key to
finalize the program.
CASH
PLU Status Chart
Address Program Option
PLU is negative item
N1
PLU is single item
N2
PLU is taxable by rate 4?
N3
PLU is taxable by rate 3?
N4
PLU is taxable by rate 2?
N5
PLU is taxable by rate 1?
N6
PLU is override preset ?
N7
PLU is preset?
N8
SBTL
PLU
Enter the PLU#,
PLU
up to 500
N4 N5 N6 N7
PLU
N8 X/TIME
Value
Yes = 1
No = 0
Yes = 1
No = 0
Yes = 1
No = 0
Yes = 1
No = 0
Yes = 1
No = 0
Yes = 1
No = 0
Yes = 1
No = 0
Yes = 1
No = 0
Program Mode Programming • 59