Program 100 - Plu Status Programming - Sam4s ER-5200 Operation And Program Manual

Program 100 - PLU Status Programming

ER-5200/40/15
1. Turn the control lock to the P position.
2. To begin the program, enter 1 0 0, press the SBTL key.
1 0 0
3. Select the PLU or PLUs you wish to program in one of the following ways:
•
Press a PLU key on the keyboard, or
PLU
•
Press the first PLU keys that are to receive the same status and Press the
last PLU keys, or
PLU PLU
•
Enter up to 15 digit number of the PLU and press the PLU key, or
Enter the PLU#,
up to 15 digits
•
Enter the number of the first PLU in a range of PLUs that are to receive
the same setting; press the PLU key. Enter the last number in the range;
press the PLU key.
Enter the PLU#,
up to 15 digits
4. Refer to the "PLU Status Chart" to determine the values for N1 through N9.
(If an address offers more than one option, add the values for each option and
enter the sum. For example, if you wish the PLU to be taxable by rates 1 and
3, add the values for your choices, 1 + 4, and enter the sum "5" for address N5.)
Enter the values you have selected, press the X/TIME key. (You do not need
to enter preceeding zeros. For example, if you are only selecting a value for
N8, i.e. print price on guest check number 1, just enter 10.)
N1 N2 N3
5. To program additional PLUs, repeat from step 3, or press the CASH key to
finalise the program.
CASH
SBTL
PLU
Enter the PLU#,
PLU
up to 15 digits
N4 N5 N6 N7
PLU
N9
N8 X/TIME
Program Mode Programming • 91