Crankshaft Installation - Linhai ATV 260 Service Manual

CHAPTER 3A ENGINE
4. Inspect:
Crankshaft sprocket
Wear/ Damage → Replace crankshaft.
Bearing
Wear/ Crack /Damage → Replace crankshaft.
Pump drive gear
Wear/ Damage → Replace crankshaft.
5. Inspect:
Crankshaft journal
→
Clogged Blow
compressed air.
CRANKCASE INSTALLATION
1. Clean all the gasket mating surface and
crankcase mating surface thoroughly.
2. Apply:
Sealant
(onto the crankcase mating surfaces)
NOTE:
DO NOT ALLOW any sealant to come into
contact with the oil gallery.
3. Install:
Dowel pins
Timing chain
NOTE:
Install the timing chain not to be seen through
the crankshaft hole○
260/ 300 cc
out the journal
on the crankcase (left) .
a
with
ATV SERVICE MANUAL07.0
CHAPTER 3 ENGINE PAGE. 3A- 55