Wheel Installation - Linhai ATV300-D T3b Owner's/Operator's Manual

ATV300-D T3b
handling which could cause an accident resulting in serious injury
or death.
Follow the safeguards listed below to prevent this type of
situation.
Important Safeguards
Maintain proper tire pressure according to charts below. Improper
tire inflation may affect ATV maneuverability.
Do not use improper tires. The use of non-standard size or type
tires may affect ATV handling.
Make certain the wheels are installed properly. If wheels are
improperly installed it could affect vehicle handling and tire wear.
Wheel Removal Procedure
1. Stop the engine, place the transmission in gear and lock the
parking brake.
2. Loosen the wheel nuts slightly.
3. Elevate the side of the vehicle by placing a suitable stand
under the footrest frame.
4. Remove the wheel nuts and remove the wheel.
Tire Pressure
front
34.5kPa/5PSI
16. MAINTENANCE

Wheel Installation

1. With the transmission in gear and the parking brake locked,
place th wheel in the correct position on the wheel hub. Be sure
the valve stem is toward the outside and totation arrows on the
OWNER'S/OPERATOR'S MANUAL
rear
34.5kPa/5PSI
- 107 -
16.0