Toe Alignment - Linhai ATV 260 Service Manual

CHAPTER 2 MAINTENANCE
ATV SERVICE MANUA 07.0

2.3 TOE ALIGNMENT

METHOD: STRAIGHTEDGE OR STRING
Be sure to keep handlebars centered
NOTE: String should just touch side surface
of rear tire on each side of the ATV.
Measure from string to rim at front and rear of
rim.
Rear rim measurement (A) should be 1/16" to
1/8" (1.5 to 3 mm) more than front rim
measurement (B).
NOTE: The steering post arm (frog) can be
used as an indicator of whether the
handlebars are straight. The frog should
always point straight back from the steering
post when handlebars are straight.
WARNING: Always pay attention to tie rods
assembly, Both ends must screw in same and
enough threads length.
CHAPTER 2 MAINTENANCE PAGE. 2- 11