Linhai ATV 260 Service Manual page 167

CHAPTER 3B ENGINE 50cc/80cc
ATV SERVICE MANUAL07.0
Disassembly
Remove the two blots and remove the motor
housing and the other parts.
Inspection
Other components inspection.
Inspect them for wear, damage or discoloration.
Replace them if necessary.
Clean attached metal particles from the
commutator surfaces.
Measure the resistance between each contact
surface of the components.
Make sure there is no conduction current between
each commutator segment and the armature shaft.
Check starter motor housing conductivity.
Be sure there is no conduction current between the
cable terminal and starter motor housing.
Check conductivity between the lead terminal and
brush.
Replace them if necessary.
CHAPTER 3B ENGINE PAGE 3B - 61 -