Tire Pressure; Tire Inspection; Tire Tread Depth - Linhai ATV 260 Service Manual

CHAPTER 2 MAINTENANCE
end of nut goes into taper on wheel.
CAUTION:
If wheels are improperly installed it could
affect Vehicle handling and tire wear.

2.7 TIRE PRESSURE

TIRE INSPECTION

CAUTION :
Maintain proper tire pressure. Refer to the
warning tire pressure decal applied to the
vehicle.
Improper tire inflation may affect ATV
maneuverability.
When replacing a tire always use original
equipment size and type and replace in
pairs, especially in 4X4 model.
The use of non- standard size or type tires
may affect ATV handling and cause
machine damage, especially in 4X4 model.

TIRE TREAD DEPTH

Always replace tires when tread depth is
worn to 1/8" (3m m ) or less.
Tire Pressure Inspection
Front
260/300
(27±0.5KPa)
B-Type
150/ 200
Youth/ Mini
WARNING Operating an ATV with worn tires will
increase the possibility of the vehicle skidding
easily with possible loss of control.
Worn tires can cause an accident.
Always replace tires when the tread depth
measures 1/8" (3mm ) or less.
CHAPTER 2
ATV SERVICE MANUA 07.0
Rear
4PSI
(27 ±0.5KPa)
5PSI
（35KPa） （35KPa）
MAINTENANCE
4PSI
5PSI
PAGE. 2- 19