Starter Pinion Removal - Linhai ATV 260 Service Manual

CHAPTER 3B ENGINE 50cc/80cc
ATV SERVICE MANUAL07.0
3.9.3 Starter pinion
removal
Remove the left crankcase cover.
Remove the pinion.
Make sure not to damage the drive belt during the
removal.
INSPECTION
Check if the starter pinion operates properly.
Check the gears and bearing for wear or damage.
Check for extensions of driver gear.
Check for spring return of driver gear.
Clean assembly with solvent and lube with dry
graphite or light grease.
Do not use heavy grease. This will limit the fast
movement of the starter pinion.
INSTALLATION
Apply a light film of grease to the gears and install
the starter pinion by reversing the removal
procedure.
Install the left crankcase cover.
CHAPTER 3B ENGINE PAGE 3B - 63 -