The Clutch / Transmission Pulley Assembly - Linhai ATV 260 Service Manual

CHAPTER 3B ENGINE 50cc/80cc
ATV SERVICE MANUAL07.0
Drive in the new needle bearing, keeping the "mark"
side up.

The clutch / transmission Pulley assembly

Assemble the transmission pulley guide pin and oil
seal.
Install the sealing cover of the collar.
Assemble the transmission pulley disk and the
spring to the clutch assembly, pressing down with
the spring compressor for the clutch spring.
Install the 28mm fix nut and tighten it.
Torque:50~60kg·m 35~40ft lbs
CHAPTER 3B ENGINE PAGE 3B - 34 -