Driving Belt Device ＆ The Starting Lever - Linhai ATV 260 Service Manual

CHAPTER 3B ENGINE 50cc/80cc
3.4 Driving belt device ＆ the starting lever
3.4.1 Important points
·This chapter is about the driving unit, the clutch / driven unit and the starting lever.
The assembly and disassembly of the driving unit can be done without dismounting the engine.
· The surface of the driving belt and the drive units are not allowed any oil, if there is any, remove it to
minimize the slip between the belt and the drive units.
Tech Criterion
ID of the driving pulley
OD of the driving pulley sleeve
Width of the driving belt
Thickness of the clutch brake lining
ID of the clutch housing
Free length of the driven belt spring
OD of the transmission pulley
ID of the transmission pulley
OD of the roller
Item
ATV SERVICE MANUAL07.0
Normal Size
20.0-20.012
19.947-19.96
18
106.9-107.1
92.5
33.955-33.98
33.995-34.03
15.9-16.1
CHAPTER 3B ENGINE
Unit. mm
Max Service
Allowance
20.062
19.9
17
2.0
107.5
87.2
33.93
34.06
15.4
PAGE 3B - 24 -