Assembling The Crankcase - Linhai ATV 260 Service Manual

CHAPTER 3B ENGINE 50cc/80cc
Check the clearance of the journal of the big end of
the connecting rod in X—Y directions
Max. service allowance:
Replace, when it goes beyond 0.05mm
Measure the run out of the crankshaft
Max service allowance:
Replace, when it goes beyond 0.10mm
Check if there is any abnormal noise and
looseness, when the crankshaft bearing revolves.
Replace totally, if any abnormal noise/looseness is
detected.

3.6.4 Assembling the crankcase

Use the following tools to install the oil seal of the
crankcase.
Bearing outer race driver
Bearing outer race 32x35mm
ATV SERVICE MANUAL07.0
CHAPTER 3B ENGINE PAGE 3B - 43 -