The Crankcase & The Crankshaft - Linhai 2004 ATV 260 Service Manual

CHAPTER 3B ENGINE 50cc/80cc
Tighten the bolts of the final gearbox cover.
Assemble the clutch/driving pulley disk.
After assembling, fill it with the gear oil.
Designated gear oil: SEA 15W/40SE
Volume of the gearbox:
Filling: 0.12L
Changing:0.10L
Screw up the oil screw and tighten it
Torque: 17-23N·m 12.5-17ft lbs
Start the engine to check if there is oil leakage.
Check the oil level.
Replenish it with the designated gear oil when the
oil is not sufficient (through the oil checking hole)
3.6 The crankcase ＆the crankshaft
ATV SERVICE MANUAL09.0
CHAPTER 3B ENGINE PAGE 3B - 40 -