Oil Pump Removal - Linhai ATV 260 Service Manual

CHAPTER 3B ENGINE 50cc/80cc
ATV SERVICE MANUAL07.0
3.7.3 Oil pump
removal
Remove engine right outer cover fan magnetor.
Remove alternator rotor.
Remove stator pulse coil.
Remove 8 bolts of right crankshaft case cover and
take off crankshaft case cover.
Remove washer and fixed pin.
Remove the fixed nut of gear in oil pump.
Take off gear of oil pump.
Remove fixed bolts of oil pump.
Take off oil pump.
Take off two O-rings.
Check O-rings for damage.
Replace if necessary.
CHAPTER 3B ENGINE PAGE 3B - 47 -