Table of Contents
Advertisement
CHAPTER 3B ENGINE 50cc/80cc
ATV SERVICE MANUAL07.0
Scrape the gasket away from the joint surfaces.
Attention:
Be sure not to scratch the joint surfaces.
Remove the oil seal from the left crankcase.
Remove the oil seal from the right crankcase.
3.6.3 The crankshaft
Measure the left and right clearance between both
sides of the big end of the connecting rod.
Max. service allowance:
Replace, when it goes beyond 0.55mm
CHAPTER 3B ENGINE
PAGE 3B - 42 -
Advertisement
Table of Contents
Troubleshooting
