Assembling The Cylinder - Linhai ATV 260 Service Manual

CHAPTER 3B ENGINE 50cc/80cc

3.3.5 Assembling the cylinder

Install the locating pin and the gasket to the
crankcase.
Lubricate the inner surface of the cylinder, the piston
and the piston ring with engine oil.
When assembling the piston rings, they must be
compressed into the cylinder.
Attention:
· Don't damage or break the piston ring.
· Be sure not to make the position of the ring end
gaps point to the inlet and outlet valves and
parallel with the piston pin.
ATV SERVICE MANUAL07.0
CHAPTER 3B ENGINE PAGE 3B - 23 -