Starting The Engine - Linhai M565L T3b Owner's/Operator's Manual

8. STARTING THE ENGINE

Procedure for Starting a Cold Engine
WARNING
Never run an engine in an enclosed area. Carbon monoxide in the exhaust gas
is poisonous and can cause severe injury or even death. Always start engines
outdoors.
CAUTION
You must allow your vehicle adequate warm up time before operating or
engine damage could result.
1. Place the transmission in neutral and reset the parking brake.
2. Sit on the vehicle.
1. Turn the engine stop switch to RUN.
2. Turn the ignition key to ON, apply the brake lever and press starter
button.
3. Activate the starter for a maximum of five seconds, releasing the button
when the vehicle starts. If engine does not start, release the starter for
another five
M565Li T3 OWNER'S/OPERATOR'S MANUAL 19.0
seconds. Repeat this procedure until engine starts
8-1