Procedure For Starting A Cold Engine; When And How To Use The Choke; Normal Air Temperature - Linhai LH500ATV-D Owner's/Operator's Manual

8. STARTING THE ENGINE

Procedure for Starting a Cold Engine

WARNING
Never run an engine in an enclosed area. Carbon monoxide exhaust gas is
poisonous and can cause severe injury or death. Always start engines
outdoors.
CAUTION
You must allow your vehicle adequate warm up time before operating or
engine damage could result.
1. Place the transmission in neutral and reset the parking brake.
2. Turn the fuel tank valve to ON.
3. Sit on the vehicle.
4. Turn the engine stop switch to RUN.
5. Turn the ignition key to ON, apply the brake lever and press the starter
button.
6. Do not press the throttle more than 20％ while starting the engine.
7. Activate the starter for a maximum of five seconds, releasing the button
when the vehicle starts. If engine does not start, release the starter for
another five seconds. Repeat this procedure until engine starts.

When and how to use the CHOKE

Normal Air Temperature 10°~35℃
1. Move the choke lever ① left to the fully ON (A) position, if the engine is
cold.
2. With the throttle closed, press the starter button.
OWNER'S/OPERATOR'S MANUAL
LH500ATV-D 14.0
8-1