Starting The Engine - Linhai M570L 2020 Owner's/Operator's Manual

8. STARTING THE ENGINE

Starting the Engine
Never run an engine in an enclosed area. Carbon monoxide in the exhaust
gas is poisonous and can cause severe injury or even death. Always start
engines outdoors.
You must allow your engine adequate warm-up before riding, or engine
damage could result.
1. Shift the transmission to neutral and release the parking brake.
2. Sit on the ATV.
3. Turn the engine stop switch to RUN.
4. Turn the ignition key to ON, apply the brake and press starter button.
5. Press the starter button for a maximum 5 seconds; release the button when
the engine starts. If engine does not start, wait 15 seconds and press the
starter button again for another 5 seconds. Repeat this procedure until
engine starts.
M570L OWNER'S/OPERATOR'S MANUAL
45