Drive Belt, Cvt - Linhai M565Li T3 EFI Service Manual

CHAPTER 3 ENGINE
M565Li T3 EFI SERVICE MANUAL 20.0
Warning: Never use with gasoline or
low flash point solvents to clean the
filter element.
● Inspect the filter element for tears, torn
Note: Make sure that the air filter element
is in good condition at all times. The surest
way to accelerate engine wear is to operate
7
the engine without the element or with torn
element. If driving under dusty conditions,
clean the air filter element more frequently
element must be replaced.
● Remove the drain plug (7) of air box to
drain out any water.

3.2.7 Drive belt, CVT

Removal
● Remove CVT cover.
● Loosen primary bolt (1) and gasket(2),
take drive disk.
● Loosen
nut (3).
/ driven pulley
● Remove
together with
/ driven pulley
drive belt.
● Remove drive belt (4 ) from
/ driven
.
wheel
3
1
4 2
CHAPTER 3 ENGINE PAGE. 3- 25