Supported Proximity Card Readers - Teletek electronics ECLIPSE 8 Installation Manual

2.4.5 Supported Proximity Card Readers

Summary for ECLIPSE Series Proximity Card Readers:
Reader
PR IT Reader for built-in installation
Eclipse PR Stand-alone proximity card reader
The proximity card readers are control devices for management of ECLIPSE 8/16/32/99 security systems.
The ECLIPSE proximity readers are connected to the system bus observing the polarity.
The readers are equipped with three-color LED indication for the selected arming mode and sound signalization for
announcing current events. The arming and disarming of the system via proximity reader is with using standard
proximity cards, tags or other 125kHz passive transponders.
It is possible that only proximity-card readers be included in a system without having an installed keyboard. In such
systems this would hinder current programming of parameters and cards, as well as Log Review and Technical
Trouble indications. Portable LED or LCD type keyboards can be used to accomplish such tasks.
Up to 8/32/64/99 cards can be assigned to one ECLIPSE 8/16/32/99 security systems - one card for each of the users.
The Managers in the system are allowed to program the performance of the cards.
Arming and/or disarming rights must be assigned for the respective user code.
The user may not be designated a code combination. In such case the only way to control the security system would
be the proximity-card.
The parameters and functions of the proximity card readers are programmed in Menu 9. DEVICES, according to the
realized system configuration.
•
Installation of proximity reader PR IT
Technical Specification:
Power supply
Consumption
Operation temperature
Dimensions, assembled
The PR IT proximity reader is designed for built-in installation in electrical sockets via specialized DIN box.
Description of PR IT elements:
R (red), G (green), Y (yellow), B (black) - System bus interface for connection to control panel;
Status LED – LED indicator for the status of the system bus; The LED is blinking in green during normal operation
mode of the reader; the LED is lighting on in red if there is no connection with the panel;
Red, green, yellow and blue LED – LED indicators for the current active arming mode;
RF – RFID (Radio frequency identification card reader), a place for reading a proximity card or tag for operation with
the system.
All LEDs are blinking in turn – the reader is not enrolled to the system; or there is no communication with the control
panel.
All LEDs are blinking together – the system is in programming mode.
(a)
Description
9 ÷ 18V DC (Nom. 14V)
Min. 70mA/Max.100mA
-20°C ÷ 50°C
55х48х19mm
Figure 18. Proximity card reader PR IT
Eclipse 8/16/32/99 Series - Installation Manual
ECLIPSE 8 ECLIPSE 16
✓ ✓
✓ ✓
(b)
25
ECLIPSE 32 ECLIPSE 99
✓ ✓
✓ ✓
(c)