Assigning Attributes For User Proxy Card - Teletek electronics ECLIPSE 8 User's Operation Manual

5.11 Assigning Attributes for user proxy card

In menu "1. USERS – xx. User – 06. Proxy Options" or Address 10, the manager sets
rights to user cards for arming/disarming the system via proximity card reader.
In text menus the user will see the options as a list. To enable an option, press button "1"
– a symbol "" is assigned in front of the option. To disable an option, press button "0". To
scroll over the available options, use the arrow buttons.
In address menus the options are corresponding to the numbers from the table below:
Manager code
User attributes for work with a proxy reader:
Text menus Address option Description
DISARM ENB
ARM DISABLED
STAY ARM
FULL ARM
SLEEP ARM
Notes:
Only one arming mode can be used with every proxy card.
By default, all users are allowed to arm and disarm the system in SLEEP ARM mode.
Depending on the keyboard used, the visualization on screen is as follows:
LCD 32 and LCD 32 Sensitive (address menus)
The card can disarm and arm in
SLEEP ARM mode
By pressing a digit buttons with the number of an option, it is alternatively enabled or
disabled. The option is enabled when the digit is visible on screen. The option is disabled
when the symbol "*" is shown.
LED 32
The card can disarm and arm in
SLEEP ARM mode
By pressing a digit buttons with the number of an option it is alternatively enabled or
disabled. The option is enabled when the digit is lit on the display. The option is disabled
when the digit is not lit.
ECLIPSE 8/16/32/99 Series – User Operation Manual
Address
1 Disarming all areas associated to this user.
Arming is not allowed with this code (both options 2 and 3
-
are disabled).
2 STAY ARM mode for all areas associated to this user.
3 FULL ARM mode for all areas associated to this user.
2+3 SLEEP ARM mode for all areas associated to this user.
The card can disarm and arm in
The card can disarm and arm in
User
number
FULL ARM mode
FULL ARM mode
33
Assigning
options