Ricoh D065 Service Manual page 1204

6.4 IP-FAX SPECIFICATIONS
Network:
Scan line density:
Original size:
Maximum scanning size:
Transmission protocol:
Compatible machines:
IP-Fax transmission:
IP-Fax reception:
SM
LAN: Ethernet/10base-T, 100base-TX
IEEE1394 (IP over 1394),
IEEE802.11b (wireless LAN)
8 x 3.85 lines/mm, 200x100dpi (standard character),
8 x 7.7lines/mm, 200x200dpi (detail character),
8 x 15.4lines/mm (fine character: optional expansion
memory required),
16 x 15.4lines/mm, 400x400dpi (super fine character:
optional expansion memory required)
Maximum A3 or 11"x 17" (DLT)
Standard: A3, 297mm x 432mm
Irregular: 297mm x 1200mm
Recommended: T.38 Annex protocol, TCP, UDP/IP
communication
IP-Fax compatible machines
Specify IP address and send fax to an IP-Fax compatible fax
through a network.
Also capable of sending fax from a G3 fax connected to the
public telephone lines via a VoIP gateway.
Receive a fax sent from an IP-Fax compatible fax through a
network.
Also capable of receiving fax from a G3 fax connected the
public telephone lines via a VoIP gateway.
191
IP-Fax Specifications
D418