Enabling Dual Monitor Mode On The Player; Enable Self-Healing - Polycom Digital Signage 2000 Getting Started Manual

Setting Up Your Monitor
Polycom, Inc.
Attach a VGA or DVI cable to your secondary monitor and the other end
6
to the second connector on your display splitter, ensuring the appropriate
video input is selected on your primary monitor. Next, right click on the
greyed out icon and choose attach, and select extend windows desktop
onto this monitor, before finally clicking Apply and OK.
Note: If you have your second monitor attached already, you may see a clone of
your desktop screen or the primary and secondary monitors may be reversed. If
reversed, swap cables and start over.

Enabling Dual Monitor Mode on the Player

Click on Tools > Settings > Video Settings from the Menu of the
1
Polycom Digital Signage Player.
Select Dual Monitor Mode.
2
Select your desired output resolution, typically 1280 x 720.
3
To view the output of the Polycom Digital Signage Player full-screen on
4
the second monitor, enable Full Screen.
Click Apply and OK to close the Program Settings dialog box.
5
To reload the Playlist, click File > Load Playlist.
6
Choose DefaultPlaylist.xplst and click Open. The Playlist should begin
playing.
Polycom Digital Signage Player Setup
21