Configuring The Rmx 1500/2000/4000 For Microsoft Integration - Polycom RMX 1500 Administrator's Manual

Appendix H-Setting the RMX for Integration Into Microsoft Environment
Configuring the RMX 1500/2000/4000 for
Microsoft Integration
Modify the RMX Management Network Service to Include
the DNS Server
H-80
The RMX is integrated in Microsoft Office Communications Server R1 and
R2 (Wave 13) and Microsoft Lync Server environments by setting its
Transport Type (in the SIP server configuration) to TLS and creating a
certificate that is sent to the RMX. This procedure is also required when
encryption of SIP signaling is used.
If a Load Balancer is used in Microsoft Office Communications Server R1
environment, the transport type may be set to TCP or TLS.
In addition, if the DNS server was not enabled in the Network Management
Service on the RMX, it must be enabled for the integration in Microsoft
Office Communications Server (Wave 13, R1 and R2) and the Lync Server
(Wave 14) environments.
The Management Network that is defined during first entry setup does not
include the definition of the DNS which is mandatory in Microsoft
environment and has to be modified.
In Multiple Networks configuration, only one DNS server can be defined in one
of the Signaling network Service for the entire environment. In such a
configuration, do not define the DNS Server in the Management Network
Service and skip this procedure.
To add the definition of the DNS to the Management Network in the
RMX:
1
Using the Web browser, connect to the RMX.
2
In the RMX Management pane, expand the Rarely Used list and click
IP Network Services (
3 In the IP Network Services pane, double-click the Management
Service .
The Management Network Properties - IP dialog box opens.
).