Change The Video Layout; Start Video During An Audio-Only Call - Polycom RealPresence Group Series Manual

Related Topics
Video Adjustments

Change the Video Layout

What you see during a conference call can vary depending on how the system is set up, the number of
sites in the call, the number of monitors you are using, whether content is shared, and whether Self
View is on.
You can change the layouts of how video, self view, and content display during a conference call. The
multipoint monitor layout used on the host system is the layout used in the call.
Procedure
1 In a call, tap
2 Do one of the following:
•
To change your video layout (the near-end), tap
•
If the far-end has enabled meeting participants access to change the far-end layout, tap
More > Participant Layout.
3 Select one of the available layouts.
Related Topics
Video Adjustments

Start Video during an Audio-Only Call

When you're in an audio-only Skype for Business call or you join a call as an audio-only participant,
you can start your video at any time and create a video call. You can also preview your video stream
before it is sent to the other call participants.
After you start your video and become a video participant, you cannot return to being an audio-only
participant. You can only mute your video.
Procedure
1 During a call, tap
2 Preview your video stream and select Start Video.
Your video stream starts streaming to the other call participants.
Printed from Polycom, Inc. (http://documents.polycom.com)
to open the Quick Access menu.
and select Start Video.
More > PIP Layout.
Page 27