Initial System Configuration; Initial Ip Configuration - Polycom MGC-100 Getting Started Manual

Initial System Configuration

Initial IP
Configuration
Installing the
MGC Manager
Starting the MGC
Manager
Defining an MCU
Connecting
to an MCU
Configuring the
Network Services
The MGC-50/MGC-100 requires basic configuration before you can start
running conferences.

Initial IP Configuration

The system is shipped with a default IP address: 129.254.4.8. Ordinarily,
you will have to change the default address to the IP address appropriate for
the site's LAN. At this point you cannot communicate with the MCU from
the MGC Manager application, as the IP address is incorrect.
To define the IP address on first entry:
1. Remove the Main Control Module cover.
MUSIC
LINE IN
Figure 3-1: MGC-100
NET
A
B
COM COM 1 ALARMS
LAN
10/100 Mbits
3
KB0
3-1