Monitors And Cameras; Monitors; Configuring Monitor Settings - Polycom QDX 6000 Administrator's Manual

Monitors and Cameras

Monitors

You can connect up to two monitors to the Polycom QDX 6000 System.


The following table shows how you can connect monitors to a Polycom QDX 6000
system.
Video Output Number
1
2
For Monitor 2, the system provides RCA, S-Video, and VGA connectors. Only one at a
time is active, based on the output format configured for that monitor.

Configuring Monitor Settings

To configure monitors:
1
Monitor 1 shows the endpoint onscreen menu by default, and the user
can use the remote control to make it show the far-site pictures, local
pictures and content.
Monitor 2 shows the local picture. When the content is sent or received,
it shows the complete picture of content.
Connector
RCA (three)
RCA (yellow)
S-Video
RCA (yellow)
S-Video
VGA
Go to System > Admin Settings > Monitors.
Output Formats
YPrPb
Composite
S-Video
Composite
S-Video
VGA
3
3-1