Integration With Microsoft Live Communications Server (Lcs) - Polycom V500 Administrator's Manual

Points to note about SIP:
The SIP protocol has been widely adapted for voice over IP communications and
basic video conferencing; however, many of the advanced video conferencing
capabilities are not yet standardized. Many capabilities also depend on the SIP
server.
Examples of features that are not supported using SIP are:
• Polycom Video and Audio Error Concealment
• Encryption
• People and Content (H.239 and Polycom People+Content)

Integration with Microsoft Live Communications Server (LCS)

Integration with Microsoft LCS allows you to set up a list of LCS contacts, see
if the contacts are online, and call them without knowing or remembering their
addresses. Contacts appear in the directory and can also be displayed on the
home screen. For more information about the contact list home screen, see
Displaying Contacts on the Home Screen
To configure a V500 system for use with Microsoft LCS:
1. Contact the LCS administrator to make sure that the V500 system has a
user account on the LCS server. Make a note of the account information.
2. Go to System > Admin Settings > Network > Call Preference.
3. Go to System > Admin Settings > Network > IP > SIP Settings.
4. Configure these settings:
Setting
User Name
Password
Registrar Server
Proxy Server
5. Select Enable SIP. The system restarts when you navigate away from this
screen.
Configuring Network Use
on page 4-23.
Description
Specifies the user name created for your
V500 system with the LCS server.
Specifies the password for this user name.
Specifies the location (IP or DNS) of the
LCS server.
Specifies the location (IP or DNS) of the
LCS server.
3 - 21