Using a Polycom
Device with Skype for Business
Topics:
▪
Wake the System
•
Pair For the First Time
▪
Pair a Previously Paired RealPresence Touch Device
▪
Calling
▪
Sharing Content
▪
Settings
▪
Troubleshooting
®
The Polycom
RealPresence Touch
initiate video conferences when it is paired with supported Polycom endpoints.
Depending on how your administrator has configured your system, the Home screen of your
RealPresence Touch device can display with one of the following interfaces:
▪
The general interface displays the
▪
The Microsoft Skype for Business mode interface displays a
Your administrator powers on, configures, and pairs the RealPresence Touch device with the system. For
help with the touch device, contact your administrator.
Wake the System
After the RealPresence Touch device has been idle for some time, the device goes into power-saving
mode. You can wake both the device and the RealPresence Group Series system.
Procedure
» Tap the RealPresence Touch device screen.
Pair For the First Time
To pair your RealPresence Touch with a RealPresence Group Series system that has not been paired
before, you must enter the system's credentials before connection can be established.
Procedure
1. After completing the out-of-box (OOB) setup wizard, the RealPresence Touch displays the pairing
screen.
2. Tap the Manually Pair tab.
3. Enter the IP Address, Admin ID, and Password for the system.
4. Tap Pair.
The pairing connection begins, and the Home screen displays when the pairing is successful.
®
RealPresence Touch
™
device is a highly-intuitive touch control device that enables you to
Place a Call icon.
New Meeting icon.
™
6