Using The Polycom Touch Control; Recharging The Remote Control Battery - Polycom RealPresence Group Series User Manual

User's Guide for the Polycom RealPresence Group Series and the Polycom Touch Control

Using the Polycom Touch Control

Use the Polycom Touch Control to control
a Polycom RealPresence Group system.
Touch the screen to select an item.
Drag your finger across the screen to
scroll.
Scroll left and right on
the Home screen for quick
access to common calling
and configuration tasks.
Touch Back to go to the
previous screen. Touch
Home to go to the Home
screen.

Recharging the Remote Control Battery

2
You use the Polycom Touch Control to place calls, adjust the volume, control
the camera, show content, and select options.
Your system setup sheet shows how to charge the battery in the remote control
the first time. When the remote control battery power is at 10% or less, a
notification is displayed on the home screen. Although other notifications
override the low battery notification, the low battery notification returns after
the other notifications are dismissed. The low battery notification is not
displayed while the system is in a call.
The following steps describe how to recharge the battery.
To recharge the remote control battery:
1 Pull the battery out of the end of the remote control.
2 Insert the USB plug of the battery into a USB 2.0 port such as the one on
your system.
The RealPresence Group 300 and RealPresence Group 500 systems have
two USB 2.0 ports on the back of the system, while the RealPresence
Group 700 has one USB 2.0 port on the front of the system and two USB
3.0 ports on the back of the system.
Use the Call screen for
quick access to common
tasks while you are in a call.
Polycom, Inc.